NEC Storage Manager Messages Handbook page 59

Chapter 2 Message List
iSM03301: SVP failed. name=(<aaa...a>)
[Classification]
[Explanation]
[Measures]
iSM03302: UDP port is in use. SNMP trap can
[Classification]
[Explanation]
[Measures]
ip=<bbb...b> detail=<cc-dddd>
INFO
Service processor has become unavailable for use due to a problem.
If SVP is in redundant composition, iSM server will continue processing by
switching the SVP.
aaa...a : Disk array name
bbb...b : IP address of service processor (SVP)
cc-dddd : Detail information (This code isn't disorder reason but a value
for maintenance.)
Check SVP status and remove the hindrance.
not be collected. detail=<aa-bbbb>
WARNING
The SNMP TRAP receiving is not possible because the SNMP TRAP receiving
port number 162 of the server operated by iSM server cannot be used.
Therefore, swift collecting of trouble information is not available, and it has to
be collected by polling. The port may be used by other application.
aa-bbbb : Detail information (This code isn't disorder reason but a value
for maintenance.)
By making the port number 162 available to use, the SNMP TRAP receiving can
be done normally. Especially, it is easy to use the SNMP TRAP service on the
Windows system by installing it in the system and executing the environment
settings.
54