iSM14418: Auto repair mode : mode=<aaa>,
status=<bbb...b>
[Classification]
INFO
[Explanation]
It indicates that ON/OFF of the auto repair was set.
aaa
bbb...b
[Measures]
When an error occurs (status=failed was output), the configuration or setting of
the disk array may be changed. After updating it to the newest information or
restarting state monitoring, check current state and execute again.
iSM14419: Temp. sense interval(maintenance) :
interval=<aaaaa>
[Classification]
INFO
[Explanation]
It indicates that temperature monitoring interval was set.
aaaaa
[Measures]
Invalid temperature monitoring interval may be set. Check the set value and
execute again.
: on, off
: Execution state of the command.
good
: Normal
failed(xxxx) : Error occurred (xxxx is error description)
: Temperature monitoring interval
359
Chapter 2 Message List