NEC Storage Manager Messages Handbook page 45

Chapter 2 Message List
iSM03141: Management of control path in
[Classification]
[Explanation]
[Measures]
iSM03141: Management of control path in
[Classification]
[Explanation]
[Measures]
diskarray[<a>] failed. file=<bbb...b>
command=(<ccc...c>) status=
(<dd>/<ee>/<ff>/<gg>) detail=<hh-iiii>
NOTICE
Failed in the inclusion of the control path.
This message is output on UNIX system.
a : Disk array specification number (1 to 32) in the environment
definition file (agent section)
bbb...b : Special file name
ccc...c : Command Descriptor Block of the issued command
dd : Status Byte
ee : Sense Key
ff : Additional Sense Code
gg : Additional Sense Code Qualifier
hh-iiii : Detail information (This code isn't disorder reason but a value
for maintenance.)
Check the status of the disk array, and remove the cause of failure.
diskarray[<a>] failed.
Disk=(disk<bbb> (Port<ccc>
Bus<ddd> Target<eee> Lun<fff>))
command=(<ggg...g>)
status=(<hh>/<ii>/<jj>/<kk>)
detail=<ll-mmmm>
NOTICE
Failed in the inclusion of the control path.
This message is output on Windows system.
a : Disk array specification number (1 to 32) in the environment
definition file (agent section)
diskbbb (Portccc Busddd Targeteee Lunfff): Disk information
ggg...g : Command Descriptor Block of the issued command
hh : Status Byte
ii : Sense Key
jj : Additional Sense Code
kk : Additional Sense Code Qualifier
ll-mmmm : Detail information (This code isn't disorder reason but a value
for maintenance.)
Check the status of the disk array, and remove the cause of failure.
40