Table of Contents
Advertisement
iSMprflog:122 There is no disk array
[Explanation]
It indicates that no disk array applicable to batch operation does not exist even if
-a option is specified.
[Measures]
Check status of disk array, and retry command if necessary.
iSMprflog:123 Disk array=<aaa...a> is overload
[Explanation]
It indicates that accumulation of statistic information could not start due to the
following reasons:
(1) Disk array is overloaded.
(2) Disk array faulty.
aaa...a: Disk array name
[Measures]
Take the following measures:
Against case (1) above:
Against case (2) above:
iSMprflog:900 System call error occurred
func=<aaa...a> errno=<bbb>
detail=<cc-ddd>
[Explanation]
It indicates that an error occurred in system function.
aaa...a
bbb
cc-ddd
[Measures]
Take measures with reference to function name and error number, and then retry
command execution.
Remove the causes of overloading, and start
accumulation of statistic information in statistic
information history file.
Stop monitoring and start troubleshooting. And then
restart monitoring, and perform accumulation of
statistic information in statistic information history
file.
: System function name
: Error number
: Error description
413
Chapter 2 Message List
Advertisement
Table of Contents
