NEC Storage Manager Messages Handbook page 195

Chapter 2 Message List
iSM10316: Replication state of pair was
[Classification]
[Explanation]
[Measures]
changed: [mv=<aaa...a>(<bbbb>h)
<ccc...c>, Activity State=<ddd...d>,
Sync State=<eee...e>, Copy Control
State=<fff...f>,] [rv=<aaa...a>
(<bbbb>h) <ccc...c>, Activity State=
<ddd...d>, Sync State=<eee...e>, Copy
Control State=<fff...f>,] [several
states changed.]
NOTICE
It indicates that change of replication state (Replicate/Restore/Separate, etc.) of
paired volume was detected.
If two or more state transitions occurred within a poling interval and the midway
status could not be identified, "several states changed" is output to indicate that
multiple state transitions occurred. Both MV and RV were changed and the
two are under the same state, only one state is indicated for activity state, sync
state, and copy control state.
aaa...a : Logical disk name
bbbb : Volume number
ccc...c : Disk array name
ddd...d : Activity state
replicate
separate
restore
restore(protect) : Restore with RV protection
eee...e : Sync state
rpl/exec
rpl/sync
cancel
fault
sep/exec
separated
rst/exec
rst/sync
fff...f : Copy control state
normal suspend
abnormal suspend : Copy fault suspending
background copy
foreground(sync)
foreground(semi)
Unnecessary
190
: Replicate
: Separate
: Restore
: Replicate Execution(rpl/exec)
: Sync State(rpl/sync)
: Forced Separate(cancel)
: Failure Separation(fault)
: Separate Execution(sep/exec)
: Separated(separated)
: Restore Execution(rst/exec)
: Sync State(rst/sync)
: Copy suspending
: Copy mode changed (background)
: Copy mode changed (foreground-sync)
: Copy mode changed (foreground-semi)