Table of Contents
Advertisement
iSM08181: Specified value is the same as
current value(<a> times/minute)
[Classification]
NOTICE
[Explanation]
The specified value is same as current display refresh rate. The command will be
ignored.
a
[Measures]
Unnecessary
iSM08182: Can't change display refresh
rate(<aaa...a>[:<bbb...b>])
[Classification]
NOTICE
[Explanation]
Display refresh rate cannot be changed for the following causes.
aaa...a
bbb...b
[Measures]
Take the measures below.
- If the change was failed because a performance monitoring client was being
connected. (stop all performance monitoring clients)
Terminate all performance monitor clients, then execute the command again.
- If the change was failed due to excess number of threshold monitoring object.
(reduce threshold monitoring object) Reduce the threshold monitoring
objects from performance monitoring clients, execute the command again.
: Specified refresh rate
: cause
- stop all PerforMate client:
Refresh rate cannot be changed because a performance
monitoring screen is displayed.
- reduce threshold monitoring object:
Refresh rate cannot be changed due to excess number of
threshold monitoring object.
: Disk array name
159
Chapter 2 Message List
Advertisement
Table of Contents
