Table of Contents
Advertisement
iSM14410: Set ownership : LDN=<aaaa>h,
<aaaa>h,... <bbbb>, status=<ccc...c>
[Classification]
INFO
[Explanation]
It indicates that the ownership of Logical Disk was set.
aaaa
bbbb
ccc...c
[Measures]
When an error occurs (status=failed was output), the configuration or setting of
the disk array may be changed. After updating it to the newest information or
restarting state monitoring, check current state and execute again.
iSM14411: Cross call : mode=<aaa>,
status=<bbb...b>
[Classification]
INFO
[Explanation]
It indicates that ON/OFF of Cross call was set.
aaa
bbb...b
[Measures]
When an error occurs (status=failed was output), the configuration or setting of
the disk array may be changed. After updating it to the newest information or
restarting state monitoring, check current state and execute again.
: Logical disk number
: Controller on which the ownership to be set (CNT0 or CNT1)
: Execution state of the command.
good
: Normal
failed(xxxx) : Error occurred (xxxx is error description)
: on, off
: Execution state of the command.
good
: Normal
failed(xxxx) : Error occurred (xxxx is error description)
355
Chapter 2 Message List
Advertisement
Table of Contents
