Table of Contents
Advertisement
iSM14444: Set SCSI Socket permission :
number=<aa>h, SCSI Socket Guard
Invalid=<bbb>, SCSI Socket Valid IP
Address=<ccc...c>,<ccc...c>,...,
status=<ddd...d>
[Classification]
INFO
[Explanation]
Indicates access restriction has been specified on monitoring server.
Information specified here becomes valid after resetting disk array or service
processor.
aa
bbb
ccc...c
ddd...d
[Measures]
When an error occurs (status=failed was output), the configuration or setting of
the disk array may be changed. After updating it to the newest information or
restarting state monitoring, check current state and execute again. If state
monitoring cannot be restarted, specified IP address, etc., may be wrong. If a
wrong IP address, etc. have been specified, disable access restriction with
iSMnetconf command, and retry command execution.
: Service processor number
: Access restriction status on monitoring server (on or off)
: IP address to allow access (only when access restriction is on)
: Command execution status
good
: Normal
failed(xxxx) : Error occurred (xxxx is error description)
----
: Interrupted
373
Chapter 2 Message List
Advertisement
Table of Contents
