NEC Storage Manager Messages Handbook page 49

Chapter 2 Message List
iSM03152: Management of control path by
[Classification]
[Explanation]
[Measures]
iSM03152: Management of control path by
[Classification]
[Explanation]
[Measures]
autofind failed. file=<aaa...a>
command=(<bbb...b>)
status=(<cccccccc>)
detail=<dd-eeee>
INFO
Failed in the inclusion of the control path by auto find function. The disk
information that becomes an error cannot be included in iSM server. iSM
server will ignore the error.
This message is output on UNIX system.
aaa...a : Special file name
bbb...b : Command Descriptor Block of the issued command
cccccccc : Status Byte
dd-eeee : Detail information (This code isn't disorder reason but a value
for maintenance.)
Check the status of the disk array, and remove the cause of failure. Restart the
iSM server if necessary.
autofind failed. Disk=(disk<aaa>
(Port<bbb> Bus<ccc> Target<ddd>
Lun<eee>)) command=(<fff...f>)
status=(<gggggggg>) detail=<hh-iiii>
INFO
Failed in the inclusion of the control path by auto find function. The disk
information that becomes an error cannot be included in iSM server. iSM
server will ignore the error.
This message is output on Windows system.
diskaaa (Portbbb Busccc Targetddd Luneee): Disk information
fff...f : Command Descriptor Block of the issued command
gggggggg : Status Byte
hh-iiii : Detail information (This code isn't disorder reason but a value
for maintenance.)
Check the status of the disk array, and remove the cause of failure. Restart the
iSM server if necessary.
44