NEC Storage Manager Messages Handbook page 54

iSM03221: Control path access failed.
Disk=(disk<aaa> (Port<bbb>
Bus<ccc> Target<ddd> Lun<eee>))
command=(<fff...f>)
status=(<gg>/<hh>/<ii>/<jj>)
detail=<kk-llll>
[Classification] ERROR
[Explanation] Error occurred in the access of the control path.
This message is output on Windows system.
diskaaa (Portbbb Busccc Targetddd Luneee): Disk information
fff...f
gg
hh
ii
jj
kk-llll
[Measures] Check the status of the disk array, and remove the cause of failure. Restart the
monitoring manually if necessary.
iSM03222: Control path access failed.
file=<aaa...a> command=(<bbb...b>)
status=(<cccccccc>)
detail=<dd-eeee>
[Classification] ERROR
[Explanation] Error occurred in the access of the control path.
This message is output on UNIX system.
aaa...a
bbb...b
cccccccc
dd-eeee
[Measures] Check the status of the disk array, and remove the cause of failure. Restart the
monitoring manually if necessary.
: Command Descriptor Block of the issued command
: Status Byte
: Sense Key
: Additional Sense Code
: Additional Sense Code Qualifier
: Detail information (This code isn't disorder reason but a value
for maintenance.)
: Special file name
: Command Descriptor Block of the issued command
: Status Byte
: Detail information (This code isn't disorder reason but a value
for maintenance.)
49
Chapter 2 Message List