Bridge Parameters - 3Com PathBuilder S200 Series Owner's Manual

Configuring the PathBuilder S200 Series Switch for Bridging Operation

Bridge Parameters

Bridge Port Record
Parameters
Parameters
22
After you configure the Node record and the LAN Port record for the bridge node,
configure the Bridge parameters. Figure 14 shows the parameters that make up the
Bridge Parameters record.
Node: Address:
Menu: Configure Bridge
Bridge Parameters
*Max Number of Bridge Links
*STPE Control
Bad Hello Threshold
Bad Hello Timeout
Learn Only Period
Aging Period
Bridge WAN Data Priority
Bridged Protocols
Local Bridge ID
Figure 14. Configure Bridge Parameters
These parameters make up the Bridge Parameter Record.
*Maximum Number of Bridge Links
Range: 36 to 250
Default: 36
Description: Specifies the maximum number of bridge links allowed.
Boot Type: A change to this parameter requires a Node boot to take effect.
Date: Time:
Path:
Bridging