Spanning Tree Statistics - 3Com PathBuilder S200 Series Owner's Manual

Spanning Tree Statistics

Spanning Tree
Figure 58 shows the information displayed by the Spanning Tree Status report.
(STPE) Status
Figure 58. Spanning Tree Status
Descriptions for This table describes the screen terms for the Spanning Tree Statistics report.
the Spanning Tree
Status report
Bridging
T0008-16F
Node: Address:
Spanning Tree Statistics
STPE Bridge ID: 00:ff:ff:ff:00:00:00:00 Root Bridge ID: 00:ff:ff:ff:ff:ff:ff:ff
Root Path Cost 03
Max Age: 0
Last Topological Change
Topological Changes
Bridge-Link State
___________ _____
1 Forwarding
5 Forwarding
Term
STPE Control Configured value of STPE Control. If STPE is configured for
MAN, the rest of the parameters are not displayed.
STPE Bridge ID The value of the bridge ID which is transmitted by the bridge
in STPE PDUs.
Root Bridge ID The root of the spanning tree as determined by the STPE.
Root Path Cost The cost of the path to the root as seen from this bridge.
Root Port The bridge link number that offers the lowest cost path from
this bridge to the root bridge.
Max Age The actual Max Age timeout value that this bridge is
currently using.
Forward Delay The actual Forward Delay value that this bridge is currently
using. The amount of time before sending a regular
(non-spanning tree) frame.
Last Topological The time when the last topological change was detected.
Change
Topological The number of topological changes since the last reset or
Changes restart.
Bridge Link Number of specified bridge link.
Date:
Root Port: Bridge-Link
Forward Delay: 0
09-AUG-1993 08:21:33
0
Priority Path Cost
________ _________
128 1
128 1
Description
Bridge Statistics
Time:
Page: 1 of 1
125
Release 5.2M