3Com PathBuilder S200 Series Owner's Manual page 135

Bridging
T0008-16F
Term (continued)
Active Filters:
MAC Address
Active Filters:
Protocol Class
Note
This screen can be several pages long depending on configuration.
Description
• MAC Address: 6-byte value of MAC
Address parameter from the MAC Filter
Table.
• Source In: Value (PASS or BLOCK) from the
MAC Filter Table. Action to be taken on an
inbound frame having the indicated MAC
Source address.
• Source Out: Value (PASS or BLOCK) from
the MAC Filter Table. Action to be taken on
an outbound frame having the indicated
MAC Source address.
• Destination In: Value (PASS or BLOCK)
from the MAC Filter Table. Action to be
taken on inbound frame for the indicated
MAC Destination Address.
• Destination Out: Value (PASS or BLOCK)
from the MAC Filter Table. Action to be
taken on outbound frame for the indicated
MAC Destination address.
• Protocol Class: Value (DSAP or SNAP) of
Protocol Class parameter of a Protocol Filter
Table.
• Value: Represents the value of the Protocol
parameter of a Protocol Filter Table. This
value can be 1 byte (DSAP) or 5 bytes
(SNAP), depending upon which type of
protocol is involved in the frame.
• Incoming: Value (PASS, BLOCK) from the
Protocol Filter Table. Action to be taken on
outbound frame for the indicated protocol
value.
• Outgoing: Value (PASS, BLOCK) from the
Protocol Filter Table. Action to be taken on
outbound frame for the indicated protocol
value.
Bridge Statistics
131
Release 5.2M