3Com PathBuilder S200 Series Owner's Manual page 120

Mixed LAN Operation
Statistics
IP and IPX Support A PathBuilder S24x, 26x, and 27x switch performing a Mixed LAN operation
116
Step Action (continued)
Type ; and press Return.
9
10 Perform a Bridge Link boot from
the Boot menu.
11 Configure the WAN bridge link to
support Transparent Bridging and
Source Route Bridging.
Select Bridge Link Parameters and
type in a WAN entry number from
5 to 36 to display the Bridge_Type
parameter. Enter the string
BOTH_SR_AND_TB.
Type ; and press Return.
12
13 Perform a Node boot to implement
your changes.
Note
Duplicate bridge link or router interface numbers results in only the lowest
numbered port being initialized.
Bridge link statistics for the WAN bridge link show the status of Mixed LAN links as
Both TB and SRB Active
BOTH_SR_AND_TB, and the Ethernet port successfully initialized.
The statistics screen displays information on both the Transparent Bridging
operation and the Source Route Bridging operation on the WAN link. If the node is
booted with only one port configured or active, then the statistics screen displays
or only.
Active SR Active
supports IP and IPX routing of traffic with no additional configuration needed.
when the WAN bridge link is configured as
Result/Description
The record is saved.
This enables the bridge link.
This enables TB and SR on the
WAN link.
The record is saved.
Your changes are implemented.
TB
Bridging