Bridge Link Parameters - 3Com PathBuilder S200 Series Owner's Manual

Configuring the PathBuilder S200 Series Switch for Bridging Operation

Bridge Link Parameters

Introduction
Bridge Link
Parameters
26
The bridge uses Bridge Links as connections to the LAN and WAN networks.
The LAN Bridge Link connects the bridge directly to the local LAN, and its
parameters control the characteristics of this connection.
The WAN Bridge Link parameters let you establish and maintain SVC connections
to a remote LAN bridge. The bridge views the LAN bridge links and the WAN
bridge links as links to the networks attached to it.
Figure 15 shows the Bridge Link parameters.
Node: Address:
Menu: Configure Bridge
Bridge Parameters
Bridge Link Parameters
Entry Number
Bridge Type
Bridge ID
Hop Count Limit
Largest Frame Size
MAC Address Filter Action
Protocol Filter Action
NETBIOS Name Filter Action
STPE Link State
Link Mode
Virtual Ring Number
Figure 15. Configure Bridge Link Menu
Date: Time:
Path:
Bridging