3Com PathBuilder S200 Series Owner's Manual page 86

Bridge Filtering
82
Incoming NetBIOS Name Link Action
Range: PASS, BLOCK, PASSLIST, BLOCKLIST
Default: PASS
Description: The following describes the options that you can define for the
link:
• PASS — Passes all incoming frames with a specified
NetBIOS name on all links.
• BLOCK — Blocks all incoming frames with a specified
NetBIOS name on all links. Passes incoming frames with
other NetBIOS names on all links.
• PASSLIST — If you choose this value, you need to specify a
pass list in the List of Links parameter. Links that are listed
pass the frame. Links that are not listed block the frame. An
empty list means that all links block frames.
• BLOCKLIST — If you choose this value, you need to specify
a block list in the List of Links parameter. Links that are listed
block the frame. Links that are not listed pass the frame. An
empty list means that all links pass frames.
Note
If you chose PASS or BLOCK, skip the List of Links parameter.
Incoming NetBIOS Name List of Links
Range: 1, 5 to 36
Default: The individual numbers correspond to the links that you filter
according to the preceding parameter.
Description: The following describes the options that you can define for the
link:
• PASSLIST — Passes all incoming frames on the links that are
listed. Blocks all the incoming frames on the links that are not
listed. An empty list means that all links block the frames.
• BLOCKLIST — Blocks all incoming frames on the links that
are listed. Passes all the incoming frames on the links that are
not listed. An empty list means that all links pass the frames.
You can enter a range of link numbers, for example,
1, 6, 8-12 indicates 1, 6, 8, 9, 10, 11, and 12.
Bridging