3Com PathBuilder S200 Series Owner's Manual page 83

Configuring To access the NetBIOS Name Filter Action parameter, follow the steps below:
NetBIOS Name
Filtering
Parameter The NetBIOS Name Filter Action parameter is in the Bridge Link Parameters record.
NetBIOS Name Filter Action
Bridging
T0008-16F
Step Action
Select Configure -> Configure
1
Bridge -> Bridge Link
Parameters from the CTP Main
menu.
2 Enter the number of the link that
you are defining and complete the
NetBIOS Name Filter Action
parameter using the description in
the Parameters section that follows.
Range: PASS, BLOCK, NONE
Default: NONE
Description: When using NetBIOS Name Filters, set the NetBIOS Name Filter
Action to BLOCK on Bridge Link 1 (the LAN link). Then define
the NetBIOS Name Filter Table records with patterns for each of
the server names that you want to access.
• PASS — Passes all frames with a NetBIOS name that is not
listed in the NetBIOS Name Filter Table.
• BLOCK — Blocks all frames with a NetBIOS name that is
not listed in the NetBIOS Name Filter Table.
• NONE — Indicates no NetBIOS name filtering for the link.
Bridge Filtering
Result
Entry Number 1 appears.
Note
The table has one entry for each
logical bridge link in the bridge
node. Bridge Link Entry 1 is
reserved for the primary LAN
interface. The WAN bridge links
start at entry 5.
Release 5.2M
79