Configuring The Lss Record; Bridging - 3Com PathBuilder S200 Series Owner's Manual

LAN Server Subsystem

Configuring the LSS Record

Example of LCC
Record
Parameters
122
Figure 56 shows the LSS Record parameters used to configure a PathBuilder S200
series switch for LSS operation.
Node: Address:
Menu: Configure Bridge
Bridge Parameters
Bridge Link Parameters
MAC Address Filter Table
Protocol Filter Table
LSS Parameters
*Virtual Port's MAC Address
*Virtual Bridge ID
*Path Trace Control
*Functional Address Mask
Figure 56. LAN Server Subsystem (LSS) Record Menu
These parameters make up the LSS Record.
*Virtual Port's MAC Address
Range: 00-00-00-00-00-00 to FE-FF-FF-FF-FF-FF
Default: 00-00-00-00-00-00
Description: Specifies the MAC address of the virtual LAN port of the virtual
ring. This value defaults to a universally administered second
address that is supplied by 3Com in the TRIM card PROM. This
PROM address is called the Burned in Address (BIA).
A value of zero (00-00-00-00-00-00) is used as the default when
hardware is absent. When hardware is present and the MAC
Address is configured to zero, it will be overwritten by the BIA.
The LAN port can also be configured to a locally administered
MAC address.
Date: Time:
Path:

Bridging