3Com PathBuilder S200 Series Owner's Manual page 71

Parameters These parameters make up the MAC Address Filter Table.
Entry Number
MAC Address
Incoming Source Address Link Action
Bridging
T0008-16F
Range: 1 to 300
Default: 1
Description: Entry number used to reference this table record for filtering
action.
Note
If you do not wish to determine filter action for this link through
the MAC Address Filter Table, select NONE in the Bridge Link
record.
Range: 00-00-00-00-00-00 to FF-FF-FF-FF-FF-FF (Canonical)
Default: 00-00-00-00-00-00
Description: Frames with MAC Addresses that match this MAC Address are
filtered as specified in the following parameters. For an example
of MAC Address Filtering, refer to "MAC Address Filtering
Examples" in this guide.
Range: PASS, BLOCK, PASSLIST, BLOCKLIST
Default: PASS
Description: Incoming source means that the frame is entering the bridge entity
from the LAN that includes the MAC address (the source).
Therefore, a given source frame will be incoming from the LAN to
the Bridge and outgoing from the Bridge to the WAN (provided it
does not get blocked due to filtering). Refer to Figure 31.
• PASS: Pass incoming frames with this MAC Address value on
all links that are referencing this table. If this value is chosen,
skip the List of Links.
• BLOCK: Block incoming frames with this MAC Address
value on all links that are referencing this table. If this value is
chosen, skip the List of Links.
• PASSLIST: If this value is used, a pass list is specified by the
following parameter, List of Links. Links in this list pass the
frame. Links not in this list block the frame.
• BLOCKLIST: If this value is used, a block list is specified by
the parameter, List of Links. Links in this list block the frame.
Links not in this list pass the frame.
Bridge Filtering
67
Release 5.2M