Isa Boards Without A Configuration File - Intergraph TD-300 Maintenance Manual

system (that is, manually create a configuration file) by following this
procedure.
To define ISA boards without a configuration file:
1. Shut down and power off the system.
2. Insert the SYSUTIL diskette into the floppy diskette slot of the combo
drive; then restart the system.
3. When the MS-DOS Startup menu displays, select the System
Configuration Utility option.
4. From the SCU Main Menu, select Step 2, then press
Board Definition Menu displays as shown in the following figure.
5. Enter the data specified in the manufacturer's configuration
instructions.
Note: Use the and arrow keys to move the cursor from field to field.
TAB
Once inside the DMA, IRQ, and Ports fields, press
the sub-fields for entering the information.
6. Press to save the data to the system.
F10
Chapter 5 - Upgrading the System
. The ISA
6
F
ENTER
77
to display