Speaker Volume; Ring Volume; Smoothing - Brother Personal FAX-190 Owner's Manual

El
CHAPTER FIVE
i !
See Remote
Codes p. 41
[RING TIME-'XX SEC J
:4 Press _ to exit.
Now,when a call comes in and the machine is set to F/T Mode, all phones on this
line will ring the number of times you selected in Ring Delay.
You can let the fax machine pick up and detect if it's a fax or voice call. If it's a
fax call, the machine prints the fax. If it's a voice call, the machine signals you
with a double ring for the length of time you selected in F/T Ring Time.
Even if the caller hangs up during the double ringing, the fax machine continues
for the set time. If you don't pick up during the ring time, the fax machine begins
sending a fax tone, even if the caller is still on the line.
Speaker Volume
You can set the volume of the fax machine speaker.
1
Press _, {_, _.
Press[_ or[] to select y ourvolumesetting(OFF, LOW, MEDIUM,
or HIGH).
3 Press _ when the screen displays your selection.
4 Press _ to exit.
Even if you select OFE the sounds you hear after pressing _ remain on LOW.
Ring Volume
Youcan select h owloudly, o rif,thefaxmachinerings.
Press _ , _, [].
2 Press [_ or [] to select OFE LOW,MEDIUM,or HIGH.
Press
[_
when the screen
displays
your selection.
4 Press {_ to exit.
Even if you select
OFEthering
volume will remain on LOWin F/I'
mode,
and on
LOWin Call Reservation and Distinctive Ringing (if they're set to ON).
Smoothing
Whenactivated, t hisfeatureenhancestheappearance of incoming faxesby
"smoothing" lines. It takes no longer to receive faxes in this setting, which comes
setto ON.
Youcannotuse "smoothing" f or outgoingfaxes, o r forprintinglistsand reports.
,1
Press _, [], _.
2 Press {_ or [] to choose ON or OFE
3
Press {_.
4 Press_ toexit.