CHAPTER
TEN
CondensedPrint and Horizontal S treaks;
Topand Bottomof Sentences CutOff
Youprobablyhad a bad connection,with static or interferenceon the phone line.
Useyour fax machine to make a copy.If the copyis okay,then the problem was
with the phone line.
CopiesandReceivedFaxesare BlankPages
Tile roll of recordingpaper is upsidedown, oryou are not using thermal fax
paper. Scratchboth sidesof thethermalfaxpaper; one side should resultin a
black or graylinewhere youscratched. Placethissidedown in thefax machine.
CoverPage Comment AlwaysPrints"Please Call"
WhenPrintingReport
Thereportisonlya sampleofthe format,and always p rints"Please Call." The
commentyouprogrammed appearsatthe receiving f axmachine.
DialingDoes NotWork
Check for a dialtone.
Change TONE/PULSE setting(see"FaxSettings").
Checkalllinecordconnections, and makesurethecurledhandsetcordisnotin
the£XTjack.
Check powercordconnection.
Senda manual fax(press_
orlifthandset),and waittohearfaxreceiving
tonesbeforepressing['_it"'q.
Enabling/Disabling Anti-CurlCheckSheet(ACS)
Although tile factorysetting of Anti-CurlCheckSheetfeature is OFF, y ou can
check the status of your fax machine's Anti-Curl(ACS)feature byprinting an
ba-_ti-Curl Check Sheet.
Press[_ and[] at the same time to print an ACSCheckSheet.
Press_ and [_ at the same time to discontinueprinting ACS CheckSheet.
FaxMachineDoesNotAnswerWhenCalled
Makesure the fax machine is not in MANUAL mode.
Makesure it is in the correctreceivingmodeforyour setup (either FAX ONLY, F/T
or TAD).Checkfordial tone. Ifpossible,call your fax machine to hear if itchirps.