Counters; Locking The Counters; Feature - VKI Technologies 2001 Operation And Service Manual

SUPREMA 2001 - OPERATION & SERVICE MANUAL

LOCKING THE COUNTERS

SETTING THE FORCE VEND FEATURE
!
Note:
This feature is
intended mainly
for the Canadian
market and
prevents people
from using the
Suprema as a
'change maker'
(usually done by
inserting a $1 or
$2 coin, then
pressing the coin
return button to
get change in
quarters).
Suprema 2001 - Operation & Service
This feature will allow you to lock the counters, preventing the caretaker from resetting
them. With this lock enabled, it will not be possible to reset any of the counters when
in the " " mode. If the counters need to be reset, it will be necessary to go to
COUNTER
this menu to unlock them first. This obviously requires the "
limiting the number of people that can go into the programming to unlock the counters.
Once they are unlocked, they can be reset using the normal counter resetting
procedures outlined in this manual. Please note that this feature is disabled when the
equipment is shipped from the factory.
1. To lock all the counters, press the "
buttons and scroll until the following message appears,
a) Press the "
b) Using the hidden setting adjustment buttons, select "
counters, or "
c) To save, press either one of the two hidden menu scroll buttons once the
desired function is displayed on the LCD.
There are three different settings that can be programmed for this particular feature.
This feature can be set in the "
1. To set the "
FORCE VEND
menu scroll buttons and scroll until the following message appears,
a) Press the "
b) Using the hidden setting adjustment buttons, select one of the following
settings.
"
ON
completely disabled, regardless of what coins are inserted.
"
ON
or $2 coin is inserted.
"
OFF
function normally.
c) To save, press either one of the two hidden menu scroll buttons once the
desired function is displayed on the LCD.
" button on the hidden menu scroll
UP
LOCK COUNTERS
PRESS <START>
" button to enter the set mode.
START
" to unlock them.
OFF
" mode.
-
SET UP
" feature, press the "
FORCE VEND
PRESS <START>
" button to enter the set mode.
START
" - the coin return feature on the Coinco is
–
NORMAL
" - the coin return feature is disabled only when a $1
–
SMART
" - the force vend feature is disabled and the unit will
July 6, 2001
" mode access code,
-
SET UP
" to lock the
ON
" button on the hidden
UP
Page 29 of 60