Care - Sagem Phonefax 2840 User Manual

The following codes are at your disposal:
Code No. 7117
This code erases all your modifi cations to the fac-
tory settings. The fax machine will therefore react
in exactly the same way as on fi rst installation.
Code No. 7140
This code deletes all the settings and data you
have entered on your fax machine with the ex-
ception of the following:
• received fax messages
• stored short dial numbers
• stored telephone book numbers
• your name
• your telephone number
Example for using a service code:
1 Select function 45 by pressing M, 45 and
OK. Enter the service code (7117 or 7140).
Press OK.
2 With u you can select whether you really
want to delete your settings. Confi rm with
OK. Your fax machine will be reset to its
original confi guration.

Care

Before opening the fax machine, make sure that
you are electrically discharged by e. g. touching
the metal housing of a grounded appliance, a
water pipe or radiator.
Use a soft, fl uff-free cloth. You can also use a
special cloth for cleaning fax machines (see De-
livery Service). Never use liquid or gaseous clean-
ing agents (sprays, scouring agents, polishes etc.).
Do not allow any moisture to penetrate inside the
device.
24
Clean the scanner glass
1 Open the paper feed fl ap and carefully pull
out the paper. Close the fl ap again.
2 Open the operation panel by lifting in the
middle. When you hear a soft click, the panel
is engaged.
3 Open the scanner cover by pressing the two
lugs in. The cover will open downwards.
4 Use a soft cloth to gently wipe the scanner
glass on the top (A) and the white strips on
the bottom (B).