Display Language; Ring Tone Type; Ringer Volume; Speaker Volume - Sagem Phonefax 2840 User Manual

Display language

1 Select function 11 by pressing M, 11 and
OK.
2 Select the desired language with u.
3 Press OK.

Ring tone type

You can choose from ten different types of
tones.
1 Select function 35 by pressing M, 35 and
OK.
2 Select the desired ring tone with 0 to 9.
3 Press OK.

Ringer volume

You can adjust the volume of the ring tone if the
fax machine is in stand-by mode or if it is just
ringing. Please note that different volumes can be
set for the modus S and M (see chapter Fax
switch).
1 By pressing u on your fax machine the
display shows the current setting for about
three seconds.
2 Change the volume by pressing u until
the desired volume is achieved.

Speaker volume

You can adjust the volume of the loudspeaker at
any time.
1 Press DIAL.
2 Change the volume by pressing u until
the desired volume is achieved.
3 Finish your entry by pressing STOP.
13