Rigol DS1000C User Manual page 59

V. Using Vertical
You can use the vertical controls to display waveforms, adjust vertical
, and set input parameters.
1. Using vertical
The vertical
(including MATH, REF and LA). The resolution of the knob changes according to
the change of the vertical level (The digital channels of Mixed Signal Oscilloscope
changes according to the changes of the waveforms displayed). Pressing this
knob will clear the channel offset to zero. (Exclude digital channels in the Mixed
Signal Oscilloscope)
2. Using vertical
The vertical
channels (including MATH and REF, excluding LA). If the Volts/Div is set to
"Coarse", the waveform scales in a 1-2-5 step sequence from 2 mV to 5 V. If the
Volts/Div is set to "Fine", it scales to small steps between the coarse settings.
3. Channels can be adjusted by the vertical
they are selected.
4. When you change the vertical position, the position message is displayed on the
left bottom of the screen, in the same color as the corresponding channel. The
unit is V (Volts).
© Copyright RIGOL Technologies, Inc. 2007.
and
knob.
can change the position of waveforms in all channels
knob.
can change the vertical sensitivity of waveforms in all
User's Guide for DS1000 Series
RIGOL
and
and only when
2-29