Rigol DS1000C User Manual page 154

RIGOL
Memory position at limit: Prompts that the Memo Offset is at the full range of the
memory.
Save finished: Prompts that the storage progress has finished.
The storage is empty: Prompts that current position of the memory is empty to
recall saved waveforms or settings.
Measurement already selected: Prompts that the measurement parameter you
pressed is already displayed on screen.
Dot display only: Prompts that you could only use Dots type for display under this
setting.
Failed operation on files: Prompts the failed operation on files in USB memory
device
Failed print: Prompts the failed operation try to perform print.
Failed upgrade: prompts the failed upgrade from a USB drive
Files are covered: prompt the original file will be covered by a new file when store
a new file to the memory.
© Copyright RIGOL Technologies, Inc. 2007.
4-2
User's Guide for DS1000 Series