Rigol DS1000C User Manual page 104

RIGOL
Figure 2-88 Table 2-54
Menu
Pass/Fail
Record
Print set
Figure 2-89 Table 2-55
Menu
Fast-Cal
Self-Cal
Service
Preferenc
Note:
Fast-Cal: When turn on the fast-cal function, oscilloscope will calibrate vertical
offset several times according to the running time. The Fast-Cal will run immediately
when it's turned on.
Self-Cal: Oscilloscope will calibrate parameter of vertical system (CH1, CH2, and
Ext), horizontal system and trigger system.
2-74
Settings
Setup Pass/Fail test
Setup Waveform Recorder
Setup printing
Settings
ON Turn on fast-calibration
OFF Turn off fast-calibration
Execute Self-calibration
Go to service menu
Go to preference menu
© Copyright RIGOL Technologies, Inc. 2007.
User's Guide for DS1000 Series
Comments
Comments