RIGOL
Factory
The oscilloscope has default settings and can be recalled at anytime by user.
Memory location
Specify the memory location to save/recall the waveform and setup.
Load
Recall saved waveform, setup and default settings.
Save
Save waveform and setups.
NOTE:
1. Select Save stores not only the waveforms, but also the current settings of
the oscilloscope
2. Only after the settings are changed for more than 5 seconds can the user turn
off the instrument. This ensures the setup be saved properly. The oscilloscope can
store 10 settings permanently and can restore at anytime.
2-72
© Copyright RIGOL Technologies, Inc. 2007.
User's Guide for DS1000 Series