Rigol DS1000C User Manual page 57

1. Turn on or off a single logic channel
Press LA→D7-D0→Channel, and choose the wanted channel by turning (
Press No. 1 soft button or push down (
the channel is on, we can see the mark ( ). When the channel is turned off, the mark
will be shown as ( ).
As figure 2-36 shows.
2. Force turn on or off all logic channels
Press LA→D7-D0→D7-D0→Turn On / Turn Off (or D15-D8 →D15-D8→Turn On /
Turn Off) will force to turn all the channels on/off. If you want to turn on/off any
single channel instead, select the Channel by turning (
soft button or ( ) knob.
3．Set up the viewing size of logic channels:
Press LA→D7-D0→Size, or D15-D8→Size, to select wave size of logic channels.
Select to view 8 channels on the screen；Select
channels on the screen.
4．Reset the logic channels display:
Press LA→D7-D0→Reset, or D15-D8→Reset to reset the display of logic channels.
© Copyright RIGOL Technologies, Inc. 2007.
) knob to turn on /off the channel. When
Figure 2-36
User's Guide for DS1000 Series
RIGOL
) knob.
On-off
channels
Channel
and status of
on-off
) knob, then press No. 1
to view all of the 16
2-27
list