Rigol DS1000C User Manual page 130

RIGOL
Table 2-80
Cursor Increment
Cursor A
Cursor B
NOTE: Cursor could be moved only when the curse function menu is displayed.
5. To get measurement values:
Position of Cursor 1 (time cursor centered on the midpoint of screen; Voltage cursor
centered on channel ground level).
Position of Cursor 2 (same as above).
Horizontal space between cursor 1 and 2 (
(1/ X), units in Hz, kHz, MHz, GHz.
△
Vertical space between cursor 1 and 2 (
If you choose the source as LA (Mixed Signal Oscilloscope), the measurement value
is as follows:
Position of Cursor 1 (time cursor centered on the midpoint of screen).
Position of Cursor 2 (time cursor centered on the midpoint of screen).
Cursor 1 value: Hex.
Cursor 1 value: Binary.
Cursor 2 value: Hex.
Cursor 2 value: Binary.
NOTE: The values will be automatically displayed on the right upper corner of screen
when the cursor function menu is hidden or displaying other menus.
2-100
Turn the multifunctional knob (
X
cursor A horizontally
Turn the multifunctional knob (
Y
cursor A vertically
Turn the multifunctional knob (
X
cursor B horizontally
Turn the multifunctional knob (
Y
cursor B vertically
△
Y): Voltage between cursors
△
© Copyright RIGOL Technologies, Inc. 2007.
User's Guide for DS1000 Series
Operation
X): Time between cursors
) to move
) to move
) to move
) to move