1. Manuals
  2. Brands
  3. Aastra Manuals
  4. IP Phone
  5. 53I IP PHONE - RELEASE 2.0
  6. User manual

Aastra 53I IP PHONE - RELEASE 2.0 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
53i IP Phone
User Guide
Release 2.0
41-001199-00
Rev 01

Advertisement

Table of Contents
loading

Related Manuals for Aastra 53I IP PHONE - RELEASE 2.0

Summary of Contents for Aastra 53I IP PHONE - RELEASE 2.0

  • Page 1 53i IP Phone User Guide Release 2.0 41-001199-00 Rev 01...
  • Page 2 Aastra Telecom will not accept liability for any damages and/or long distance charges, which result from unauthorized and/or unlawful use. While every effort has been made to ensure accuracy, Aastra Telecom will not be liable for technical or editorial errors or omissions contained within this documentation.

  • Page 3: Software License Agreement

    Software License Agreement Aastra Telecom Inc., hereinafter known as "Seller", grants to Customer a personal, worldwide, non-transferable, non-sublicenseable and non-exclu- sive, restricted use license to use Software in object form solely with the Equipment for which the Software was intended. This Product may inte- grate programs, licensed to Aastra by third party Suppliers, for distribution under the terms of this agreement.

  • Page 5: Table Of Contents

    Incomplete Config..............6 No Service ................6 Phone Options via the IP Phone UI ........8 Reference ................9 Phone Options via the Aastra Web UI........10 User Password ...................13 Using Your Phone ..................15 Key Panel ................15 Multiple Line and Call Appearances ........18 Programmable Keys ..................19...
  • Page 6 Table of Contents Receiving Calls ..................45 Answering an Incoming Call ..........45 Sending an Incoming Call to Voicemail....... 45 Handling Calls ....................46 Placing a Call on Hold ............46 Transferring Calls..............47 Conferencing Calls ............... 48 Ending Calls................49 Managing Calls ..................50 Directory List................

  • Page 7: About This Guide

    This guide can be downloaded from www.aastra.com. • Aastra SIP 53i, 55i, 57i, 57i CT IP Phone Administration Guide – explains how to set the 53i phone up on the network and contains advanced configuration instructions for the 53i. This is an administrator level guide.

  • Page 8: Requirements

    Installation and Setup If your system administrator has not already setup your 53i phone, please refer to the Aastra 53i Installation Guide for basic installation and physical setup of the 53i. For more advanced administration and configuration information, system administrators should refer to the Aastra SIP 53i, 55i, 57i, 57i CT IP Phone Administrators Guide.

  • Page 9: Getting Started

    Initializing network Aastra 53i The 53i phone then checks settings and looks for new configuration and firmware updates for the phone from a server. If a new update is found, the phone displays the message “Updating Configuration”. This may take a few moments while the phone downloads the latest updates.

  • Page 10: Idle Screens

    When the configuration update is complete, the phone displays the following screens. Network Done Idle Screens Idle Screen 1 When the phone has successfully updated the configuration and connected to the network, the phone displays the Idle State screen: John Burns 9054550055 Sat Jun 8 2:55pm The Idle State screen lists your name (SIP screen name), extension (or...

  • Page 11: Connected State Screens

    Idle Screen 2 The second display line displays the following temporary messages if the event occurs: • No Service • DHCP Failed • Restarting..• New IP Obtained • Network Disconnected/Connected Note: Since the "Network Disconnected/Connected" display on two lines, the date and time does not show if this event displays.

  • Page 12: Conference State Screens

    Call held 03:05 For on-hold calls, the timer displays as running and the Line and main LEDs flash. When a call is muted, the icon displays as follows. John Burns 9054550055 03:00 For muted calls, the handsfree LED flashes and the Mute key LED is ON. Note: You can use the left and right arrow keys to display the idle or connected screens on other lines.
  • Page 13 For more information on restarting your phone, see "Restarting your phone" page For more information about connecting your phone, refer to the Aastra 53i Installation Guide under the section "Connecting to the Network and to Power". Check with your system administrator for assistance.

  • Page 14: Phone Options Via The Ip Phone Ui

    Phone Options via the IP Phone UI You can access specific options for the 53i IP phone using the phone’s user interface (UI) via the keypad. Pressing the Option button gives you a list of configurable options. These options allow you to customize your phone settings. Language Time and Date 1 Time Server...

  • Page 15: Reference

    Reference For more information about customizing your phone using the available options from the IP Phone UI, see the section "Customizing Your Phone" in the Aastra 53i Installation Guide. For more information about administrator options, contact your system administrator. Model 53i IP Phone User Guide...

  • Page 16: Phone Options Via The Aastra Web Ui

    In addition to the IP Phone UI options, you can also customize additional options on the IP Phone using the Aastra Web UI. In order to access your phone using the Aastra Web UI, you need to know your phone’s IP address.
  • Page 17 Using the Aastra Web UI Aastra Web UI 1. Open your web browser and enter the phone’s IP address or host name into the address field. If the browser is using HTTP, the following redirect screen displays, fol- lowed by the “Security Alert” window. This process redirects HTTP to use HTTPS for a more secure connection..
  • Page 18 The Network Status window displays for the IP phone you are accessing. 4. You can logout of the Aastra Web UI at any time by clicking Log Off. The following categories display in the side menu of the Aastra Web UI: Status, Operation, Basic Settings.

  • Page 19: User Password

    Changing your password ensures that only you can alter your phone settings, and helps keep your system secure. You can change your user password using the IP Phone UI or the Aastra Web UI. If you change the password you will need to:...
  • Page 20 2. In the "Current Password" field, enter the current user password. Note: By default, the user name is “user” (all lowercase) and the password field is left blank. 3. In the "New Password" field, enter the new user password. 4. In the "Password Confirm" field, enter the new user password again. 5.

  • Page 21: Using Your Phone

    Using Your Phone The following sections describe the various 53i phone key functions, and how they help you make and manage your calls and caller information. Key Panel The following table identifies the keys on the key panel of your 53i IP phone that you can use for handling calls.
  • Page 22 Keys Key Description Line/Call Appearance key - Connects you to a line or call. The Aastra 53i IP phone supports up to 3 line keys. Handsfree key - Activates Handsfree for making and receiving calls without lifting the handset. When the audio mode option is set, this key is used to switch between a headset and the handsfree speakerphone.
  • Page 23 Note: The above programmable keys can be changed to perform other specific functions. For more information about programming keys 3, 4, and 5, see the Aastra Model 53i User Guide. Model 53i IP Phone User Guide 17...

  • Page 24: Multiple Line And Call Appearances

    Multiple Line and Call Appearances The 53i has 3 hard line/call appearance buttons each with a corresponding status light. These line/call appearance buttons and lights can represent physical lines, calls for your extension or calls from a group that your extension is part of.

  • Page 25: Programmable Keys

    Indicates programmable key is configured for do not disturb on the phone. This option is "do not disturb" in the Aastra Web UI). Indicates programmable key is configured for Busy Lamp Field (BLF) use. User can dial out on a BLF configured key.
  • Page 26 Programmable Description Key Function Sprecode Indicates programmable key is configured to automatically activate specific services offered by the server. For example, if the sprecode value of *82 is configured, then by pressing the Sprecode softkey, *82 automatically activates a service provided by the server.

  • Page 27: Setting A Line Key

    "Multiple Line and Call Appearances" page 18. You can use the Aastra Web UI only to set a programmable key as a line. Aastra Web UI Use the following procedure to set a programmable key to function as a line.

  • Page 28: Setting A Speeddial Key

    Setting a Speeddial Key The speeddial function can be set using the IP Phone UI or the Aastra Web You can save up to 7 speed dial numbers and names on the 53i. These can be programmed to dial directly to another person’s line or extension, or set up to quickly access features such as Caller ID (*69), Voicemail.
  • Page 29 6. Press the Save key to finish. Saved Memory key 5553491234 Aastra Web UI 1. Click on Operation->Programmable Keys. 2. Select from "Key 1" through "Key 6". 3. In the "Hard Key" field, select speeddial to apply to the programmable key.
  • Page 30 Saving an Entry from the Redial, Callers, or Directory Lists to a Speeddial key IP Phone UI Use the following procedure to save an entry from your Directory List, Callers List, or Redial List on the IP phone. Save Key Directory List Key Callers List Key Redial List Key...

  • Page 31: Setting A "Do Not Disturb" (Dnd) Key

    If the phone shares a line with other phones, only the phone that has DND configured is affected. You can set DND on the programmable keys using the Aastra Web UI only. DND is not configurable from the IP phone UI.

  • Page 32: Setting A "Busy Lamp Field" (Blf) Key

    The LED illuminates steady to indicate the monitored line is off-hook or unregistered. The LED goes off when the line is idle. You can set BLF on the programmable keys using the Aastra Web UI only. BLF is not configurable from the IP phone UI.

  • Page 33: Setting A "Blf List Key

    Note: You can also use a BLF/List configured key to dial out. Aastra Web UI 1. Click on Operation->Programmable Keys. 2. Select a "Key 1" through "Key 6".
  • Page 34 5. In the "BLF List URI" field, enter the name of the BLF list defined on the BroadSoft BroadWorks Busy Lamp field page for your particular user. For example, my53i-blf-list@as.broadworks.com. Note: Contact your System Administrator for the BLF List URI. 6.

  • Page 35: Setting A "Flash Key

    The IP phone generates flash events only when a call is connected and there is an active RTP stream (for example, when the call is not on hold). Aastra Web UI 1. Click on Operation->Programmable Keys. 2. Select a "Key 1" through "Key 6".

  • Page 36: Setting An "Xml" Key

    Note: You can configure XML using the Aastra Web UI only. You can enable XML applications on your phone by setting a programmable key type to "XML". Pressing the configured key on the phone allows you to access the special XML services.
  • Page 37 Accessing the XML Service After an XML application(s) have been saved to your IP phone, and after a programmable key has been configured to access the XML application(s), the customized service is ready for you to use. IP Phone UI 1.

  • Page 38: Setting Sprecode Keys

    Sprecode softkey, *82 automatically activates a service provided by the server. Contact your system administrator for information about available services. Aastra Web UI Use the following procedure to configure a sprecode softkey on the 53i phone.

  • Page 39: Setting Park/Pickup Keys

    You configure a Park and Pickup programmable configuration using the Aastra Web UI. The following table provides the values you enter for the "Park Call" and "Pickup Parked Call" fields in the Aastra Web UI. Park/Pickup Call Server Configuration Values Server...
  • Page 40 Configuring Park/Pickup Aastra Web UI Use the following procedure to configure park/pickup on the 53i phone. 1. Click on Operation->Programmable Keys. 2. Select two keys from "Key 1" through "Key 6". 3. In the "Hard Key" field, select Park for the first key. For the second key, select Pickup.
  • Page 41 Using the Park Call/Pickup Parked Call Feature Use the following procedure on the IP phone to park a call and pick up a parked call. Park a Call 1. While on a live call, press the "Park" softkey. 2. Perform the following for your specific server: For Asterisk Server - Server announces the extension number where the call has been parked.

  • Page 42: Editing A Programmable Key

    Editing a Programmable Key You can edit a programmable key from the IP phone UI or the Aastra Web IP Phone UI Use the following procedure to edit a programmable key from the IP phone UI. Use the following illustration for reference.
  • Page 43 John Smith 6. Press the Save key to finish. Saved Memory key 5553491234 Aastra Web UI 1. Click on Operation->Programmable Keys. 2. For "Key 1" through "Key 6", select a function from the "Hard Key" field. 3. Change the value in the "Value" field if applicable.

  • Page 44: Deleting A Programmable Key

    Deleting a Programmable Key Aastra Web UI Use the following procedure to delete a programmable key function using the Aastra Web UI. 1. Click on Operation->Programmable Keys. 2. For "Key 1" through "Key 6", select none from the "Hard Key" field.

  • Page 45: Restarting Your Phone

    Note: Your phone will be out of service temporarily during the restart and down- loading process. Aastra Web UI 1. Click on Operation->Reset. 2. Click 3. Click OK at the confirmation prompt. Model 53i IP Phone User Guide 39...

  • Page 46: Making Calls

    Making Calls This section describes ways to make calls on your 53i phone, using your handset, speakerphone or headset. Dialing a Number First, take the phone off-hook by: • lifting the handset • pressing • pressing a line/call appearance button. At the dial tone, enter the number you wish to call.

  • Page 47: Using A Headset

    When handsfree is on, the speaker light turns on. Using a Headset The 53i accepts headsets through the modular RJ9 jack on the back of the phone. Contact your telephone equipment retailer or distributor to purchase a compatible headset. Note: Customers should read and observe all safety recommendations contained in headset operating guides when using any headset.

  • Page 48: Incoming Intercom Calls

    OFF, and the automatic answer for an intercom call is ON. Using the Aastra Web UI, you can enable (turn ON) or disable (turn OFF) the microphone or automatic answering (auto-answer) on the IP phone for incoming intercom calls.

  • Page 49: Redial

    The "Microphone Mute" field is enabled by default (turned OFF). The "Auto-Answer" field is enabled by default (turned ON). 2. To disable the "Microphone Mute" field (turn ON), uncheck the check box. 3. To disable the "Auto-Answer" field (turn OFF), uncheck the check box. 4.

  • Page 50: Mute

    Deleting from the Redial List Note: You cannot delete individual entries in the Redial List. IP Phone UI To Delete All Items 1. Press 2. Press the Delete Key, then press the Delete Key again at the prompt to erase all items. DELETE again to erase all items Redial List is...

  • Page 51: Receiving Calls

    Receiving Calls When a call is ringing at your extension, you see the "Inbound Call" Screen. The line/call appearance light flashes quickly for the incoming call. Laflamme & Assoc 555-1234 Answering an Incoming Call IP Phone UI To answer the call •...

  • Page 52: Handling Calls

    Handling Calls When you are connected to a call, you can use the hard keys or programmable keys on the phone to place a call on hold, transfer a call, or conference. Placing a Call on Hold When you place a call on hold, only your phone can retrieve the call. IP Phone UI To place a call on hold 1.

  • Page 53: Transferring Calls

    Retrieving a Held Call If you have more than 1 call on hold, you can scroll through the held call information by pressing navigation keys. To reconnect to a call press the line/call appearance button where that call is being held. If you press the call/line appearance button again, you will disconnect from the call.

  • Page 54: Conferencing Calls

    3. Enter the extension number of the person you wish to transfer the call to, or dial the outside number of the person you wish to transfer the call Note: To complete a "blind" transfer, press the Transfer Key again before the phone begins dialing.

  • Page 55: Ending Calls

    5. To add the new party to the conference, press the Conference key again. 6. To drop a party from the conference, press the Conference key once more. Note: You can use to scroll through and see the numbers and names (if available) of the parties in the conference call.

  • Page 56: Managing Calls

    Managing Calls The 53i has several features that make it easier to manage calls, and to keep track of your caller history, as well as your business and personal contacts. Directory List The Directory List is your personal phone book, conveniently stored within your phone.
  • Page 57 3. To search for an entry by name, press the dial pad number correspond- ing to the first letter of the name (for example, press 7 for the letter P). Continue to press the dial pad number to access other letters on the same key (for example, press 7 three times for ‘Ron’).
  • Page 58 Saving from Callers and Redial List IP Phone UI Use the following procedure to save names/numbers from the Redial or Callers List to the Directory. Use the following illustration as a reference. Save Key Directory Callers List Redial List Button 1.
  • Page 59 Entering a New Number and Name into the Directory IP Phone UI Use the following procedure to enter a new number and name into the Directory. Use the following illustration as a reference. Save Key Delete Key Directory 1. Press the Save Key. At the "Save to?" prompt, press the Directory Key. 2.
  • Page 60 Editing in Directory IP Phone UI Use the following procedure to edit a listing in your Directory. Use the following illustration as a reference. Save Key Directory 1. Press the Directory Key. 2. Access the entry you want to edit by pressing the first letter of the name on the dial pad, and to scroll through the list.
  • Page 61 Deleting Items from Directory You can delete individual items from your Directory, or you can delete all items in the Directory. IP Phone UI Use the following procedure to delete an individual item from the Directory. Use the following illustration as a reference. Delete Key Directory 1.

  • Page 62: Callers List

    UI. You can also directly dial from a displayed line item in the Callers List. You can also download the Callers List to your PC for viewing using the Aastra Web UI. When you download the Callers List, the phone stores the callerlist.csv file to your computer in comma-separated value (CSV) format.
  • Page 63 You can use any spreadsheet application to open the file for viewing. The following is an example of a Callers List in a spreadsheet application. This file displays the name, phone number, and the line that the call came in on. Accessing the Callers List IP Phone UI Use the following procedure to access the Callers List.
  • Page 64 In the Callers List, if a dial pad key is pressed when a number and/or a name is displayed, the cursor will automatically add the digit at the left side of the number to enable the entry of the prefix. John Burns 9054550055 Jun 8 2:55pm...
  • Page 65 Deleting from the Callers List You can delete individual items from the Callers List, or you can delete all items in the Callers List.. IP Phone UI Use the following procedure to delete an individual item from the Callers List. Use the following illustration as a reference. Delete Key Callers List 1.
  • Page 66 Downloading the Callers List Use the following procedure to download the Callers List to your PC using the Aastra Web UI Aastra Web UI 1. Click on Operation->Directory. 2. In the Callers List field, click on A File Download message displays.

  • Page 67: Call Forwarding

    Note: You can set the global call forward settings using the IP phone UI or the Aastra Web UI. However, you must use the Aastra Web UI to set the per-line call for- ward settings.
  • Page 68 Setting Call Forwarding Use the following procedure to set global call forwarding. For Global Call Forward Settings IP Phone UI 1. Press on the phone to enter the Options List. 2. Select Call Forward and press 3. Select Cfwd Number and press 4.
  • Page 69 1. Click on Basic Settings->Call Forward. 2. In the "Mode" field, select the mode you want to set on your phone. Note: To disable call forwarding in the Aastra Web UI, set the mode to OFF and remove the phone number in the "Number" field.
  • Page 70 3. In the "Mode" field, select the mode you want to set on this line. Note: To disable call forwarding in the Aastra Web UI, set the mode to OFF and remove the phone number in the "Forward Number" field.

  • Page 71: Additional Features

    LCD window, allowing the call to be dialed faster. DTMF playback suppression is disabled by default. Suppressing DTMF playback can be configured using the Aastra Web UI. Configuring Suppression of DTMF Playback Aastra Web UI Use the following procedure to configure suppression of DTMF playback.

  • Page 72: Display Dtmf Digits

    IP phone’s LCD display. This parameter is disabled by default (no digits display when dialing). You can enable the "Display DTMF Digits" parameter using the Aastra Web UI. Configuring Display of DTMF Digits...

  • Page 73: Stuttered Dial Tone

    Stuttered Dial Tone You can enable or disable the playing of a stuttered dial tone when there is a message waiting on the IP phone. You can configure this feature using the Aastra Web UI. Configuring Stuttered Dial Tone Aastra Web UI Use the following procedures to configure stuttered dial tone on the IP phone.

  • Page 74: Play Call Waiting Tone

    You can enable or disable the playing of a call waiting tone when a caller is on an active call and a new call comes into the phone. You can configure this feature using the Aastra Web UI. Configuring Call Waiting Tone...

  • Page 75: Incoming Intercom Calls And Auto-Answer

    By default, auto-answer, the microphone, and playing a warning tone are all enabled for incoming intercom calls. You can set incoming intercom settings and auto-answer using the Aastra Web UI only. Configuring Incoming Intercom and Auto-Answer...

  • Page 76: Using Redial Key For "Last Number Redial

    6. Click on Operation->Reset. 7. In the "Restart Phone" field click to restart the IP phone. Using Redial Key for “Last Number Redial” The IP phone has an enhanced redial user interface that allows a user to quickly redial the last number that was dialed out from the phone. You can: •...

  • Page 77: Ring Tones And Tone Sets

    Configuration Method Valid Values Default Value IP Phone UI Global: Global: Tone 1 Tone 1 Tone 2 Tone 3 Tone 4 Aastra Web UI Global: Global: Tone 1 Tone 1 Tone 2 Tone 3 Tone 4 Tone 5 Silent Per-Line:...
  • Page 78 - busy tone - congestion tones - call waiting tone - ring cadence pattern You configure global ring tones and tone sets using the Aastra Web UI and the IP Phone UI. Configuring Ring Tones and Tone Sets IP Phone UI Use the following procedures to configure ring tones and tone sets on the IP phone.
  • Page 79 Aastra Web UI 1. Click on Basic Settings->Preferences->Ring Tones. For global configuration: 2. In the "Ring Tones" section, select a country from the "Tone Set" field. 3. Select a value from the "Global Ring Tone" field Note: See the Ring Tone Settings Table page 71 for valid values.

  • Page 80: Time And Date

    • Daylight savings time Note: You can set all the above features on the IP Phone UI. However, only the Time and Date Formats can be set using the Aastra Web UI. Configuring Time and Date Use the following procedures to configure the time and date settings on the IP phone.
  • Page 81 Note: The default Date Format is WWW MMM DD (Day of Week, Month, Day) 6. Press Done to save the Date Format. Set Time Zone 1. Select Time Zone. 2. Press * to display a list of Time Zone options. 3.
  • Page 82 Aastra Web UI 1. Click on Basic Settings->Preferences->Time and Date Setting. 2. In the “Time Format” field, select the time format you want to use on your phone. Valid values are: 12h (12 hour format) (default) 24h (24 hour format) Note: The time displays on the phone’s idle screen in the format you select for this...
  • Page 83 • MMM DD Note: The date displays on the phone’s idle screen in the format you select. 4. Click to save your settings. 5. Click on Operation->Reset. 6. In the "Restart Phone" field click to restart the IP phone. Model 53i IP Phone User Guide 77...

  • Page 84: Locking And Unlocking The Phone

    Locking and Unlocking the Phone You can lock your phone to prevent the phone from being used or configured. You can lock the phone using the IP Phone UI or the Aastra Web UI. In the Aastra Web UI, the Operation->Phone Lock path also allows you to perform the following: •...

  • Page 85: Resetting A User Password

    The reset user password feature resets the password to the factory default which is blank (no password). You can reset a user password using the Aastra Web UI only. Note: Valid values when creating or changing a password are 0 to 4294967295 (inte- gers only;...

  • Page 86: Defining An Emergency Dial Plan

    1. Click on Operation->Phone Lock. 2. In the "Reset User Password" field, click The following screen displays. 3. In the "Current Password" field, leave this blank. 4. In the "New Password" field, enter a new password. 5. In the "Password Confirm" field, re-enter your new user password. 6.
  • Page 87 A police and/or fire emergency number in Asia, Europe, Middle East, and South America. You can set the emergency dial plan using the Aastra Web UI. Use the following procedure to specify the numbers to use on your phone for dialing emergency services in your area.

  • Page 88: Language

    Language The IP phones support several different languages. You can have the IP Phone UI and the Aastra Web UI display in a specific language as required. When you set the language to use, all of the display screens (menus, services, options, configuration parameters, etc.) display in that language.
  • Page 89 System Administrator. English is the default language and cannot be changed or removed. 3. Click to save your settings. The change is dynamic. The Aastra Web UI displays all screens in the language you selected. Model 53i IP Phone User Guide 83...

  • Page 90: Troubleshooting Solutions

    Why can’t I get a dial tone? Check for any loose connections and that the phone has been installed properly. For installation instructions, please refer to the “Installation and Setup” section in the Aastra 53i Installation Guide provided with your phone. Why doesn’t my phone ring? Check the ring volume on your phone.
  • Page 91 How do I change my user password? You can change the user password from the IP phone UI or the Aastra Web IP Phone UI 1. Press on the phone to enter the Options List. 2. Select User Password and press 3.
  • Page 92 Note: Your phone will be out of service temporarily during the restart and down- loading process. Aastra Web UI 1. Click on Operation->Reset. 2. Click 3. Click OK at the confirmation prompt.

  • Page 93: Limited Warranty

    (1) year period from the date of original purchase. If there is a defect or malfunction, Aastra Telecom shall, at its option, and as the exclusive remedy, either repair or replace the telephone set at no charge, if returned within the warranty period.

  • Page 95: Appendix A - Time Zone Codes

    Appendix A - Time Zone Codes The following table identifies the time zone name and time zone code to use on the IP phone. Time Zone Name/Time Zone Code Table Time Zone Name Time Zone Code AD-Andorra AG-Antigua AI-Anguilla AL-Tirane AN-Curacao AR-Buenos Aires AS-Pago Pago...
  • Page 96 Time Zone Name Time Zone Code CA-Newfoundland CA-Atlantic CA-Eastern CA-Saskatchewan CA-Central CA-Mountain CA-Pacific CA-Yukon CH-Zurich CK-Rarotonga CL-Santiago CL-Easter CN-China CO-Bogota CR-Costa Rica CU-Havana CY-Nicosia CZ-Prague DE-Berlin DK-Copenhagen DM-Dominica DO-Santo Domingo EE-Tallinn ES-Madrid ES-Canary FI-Helsinki FJ-Fiji FK-Stanley FO-Faeroe FR-Paris GB-London GB-Belfast GD-Grenada GF-Cayenne GI-Gibraltar...
  • Page 97 Time Zone Name Time Zone Code HK-Hong Kong HN-Tegucigalpa HR-Zagreb HT-Port-au-Prince HU-Budapest IE-Dublin IS-Reykjavik IT-Rome JM-Jamaica JP-Tokyo KY-Cayman LC-St Lucia LI-Vaduz LT-Vilnius LU-Luxembourg LV-Riga MC-Monaco MD-Chisinau MK-Skopje MQ-Martinique MS-Montserrat MT-Malta MX-Mexico City MX-Cancun MX-Merida MX-Monterrey MX-Mazatlan MX-Chihuahua MX-Hermosillo MX-Tijuana NI-Managua NL-Amsterdam NO-Oslo NR-Nauru...
  • Page 98 Time Zone Name Time Zone Code RO-Bucharest RU-Kaliningrad RU-Moscow RU-Samara RU-Yekaterinburg RU-Omsk RU-Novosibirsk RU-Krasnoyarsk RU-Irkutsk RU-Yakutsk RU-Vladivostok RU-Sakhalin RU-Magadan RU-Kamchatka RU-Anadyr SE-Stockholm SG-Singapore SI-Ljubljana SK-Bratislava SM-San Marino SR-Paramaribo SV-El Salvador TR-Istanbul TT-Port of Spain TW-Taipei UA-Kiev US-Eastern US-Central US-Mountain US-Pacific US-Alaska US-Aleutian US-Hawaii...
  • Page 99 Index Numerics headset, using 41 star codes for 65 idle screens 4 Aastra Web UI incomplete configuration 6 basic settings description 12 installation and setup, 9122i 2 operation description 12 Intercom calls 42 status description 12 Introduction 87 about this guide 1...
  • Page 100 Index troubleshooting solutions 84 How do I change my user pass- word? 85 How do I find the IP address of my phone? 84 How do I restart the IP phone? 86 Why can’t I get a dial tone? 84 Why does my phone display "bad encrypted config"? 85 Why doesn’t my phone ring? 84...
  • Page 102 If you’ve read this owner’s manual and consulted the Troubleshooting section and still have problems, please visit our website at www.aastra.com or call 1-800-574-1611 for technical assistance. © Aastra Telecom Inc.2007 41-001199-00 Rev 01...

This manual is also suitable for:

53i

Table of Contents