Last Call Return (Lcr) (For Sylantro Servers - Aastra SIP 53I Administrator's Manual

IP Phone Administrator Guide
Operational Features

Last Call Return (lcr) (For Sylantro Servers

Last call return (lcr) allows an administrator or user to
return" function on a softkey or programmable key. This feature is for
Sylantro servers only.
You can configure the "lcr" softkey feature via the configuration files or the
Aastra Web UI.
How it works
you configure "lcr" on a softkey or programmable key, and a call comes
If
into your phone, after you are finished with the call and hangup, you can
press the key configured
When you configure an "lcr" softkey, the label "LCR" displays next to that
softkey on the IP phone. When the Sylantro server detects an "lcr" request, it
translates this request and routes the call to the last caller.
Configuring Last Call Return
Use the following procedures to configure LCR on the IP phones.
Configuration Files
For specific last call return (lcr) parameters you can set in the configuration files, see Appendix A, the
section, "Softkey/Programmable Key/Feature Key/Expansion Module Key Parameters"
5-164
for "lcr" and the phone dials the last call you received.
configure a "last call
on page A-136.
41-001160-00, Release 2.1, Rev 04