IP Phone Administrator Guide
Network Settings
.
Aastra Web UI
Step
Action
1
Click on Advanced Settings->Network->Type of Service,DSCP.
2
Select a Protocol field:
•
"SIP"
or
•
"RTP"
or
•
"RTCP"
3
Enter a value from 0 to 63. Default values are as follows:
SIP = 26
RTP = 46
RTCP = 46
Note: If you change the ToS/DSCP setting for a Protocol, and VLAN is enabled, you will need to map
the applicable priority to the Protocol setting as shown in the table
page 4-37
For more information, see the section
4
Click
4-36
"Configuring VLAN (optional)"
to save your settings.
"DSCP Range/VLAN Priority"
on
page
4-37.
41-001160-00, Release 2.1, Rev 04
on