Aastra SIP 53I Administrator's Manual page 645

Configuration Parameters
Softkey/Programmable Key/Feature Key/Expansion Module Key Parameters
Parameter –
softkeyN states
Idle, Connected, Incoming,
Outgoing, Busy
(in Web UI)
Description
Format
Default Value
41-001160-00, Release 2.1, Rev 04
Aastra Web UI
Configuration Files
Displays the status of the phone when a softkey is pressed. You can
enter multiple values (idle, connected, incoming, outgoing, busy) for
the "softkeyN state" parameter.
You must associate the softkeyN state parameter with a specific softkey.
In the following example, the softkeyN states parameter is associated
with softkey 12:
softkey12 type: speeddial
softkey12 label: voicemail
softkey12 value *89
softkey12 states: outgoing
Note: The IP phone idle screen condenses the softkeys. So in the
previous example, softkey 12 will appear in position 1 if no other softkeys
are set. A softkey type of "empty" does not display on the idle screen at
all.
Text
For softkey type - None:
All states disabled
For softkey types - Line, DND, speeddial, BLF, BLF List, dcp, XML,
lcr, Directory, Callers List, Icom, Services, empty:
idle, connected, incoming, outgoing
For softkey type - Flash:
All states disabled
For softkey type - Sprecode, Park:
connected
For softkey type - Pickup:
idle, outgoing
For softkey type - acd:
idle
Operation->Softkeys and XML
aastra.cfg, <mac>.cfg
A-143