Configuration Parameters
Operational, Basic, and Advanced Parameters
Parameter –
sip lineN srtp mode
Description
Format
Default Value
Range
Example
Autodial Settings
Global Settings
Parameter –
sip autodial number
Autodial Number
(in Web UI)
Description
Format
Default Value
Range
Examples
41-001160-00, Release 2.1, Rev 04
Aastra Web UI
Advanced Settings->Line <1-9>->RTP Settings
Configuration Files aastra.cfg, <mac>.cfg
This parameter determines if SRTP is enabled on this line, as follows:
•
If set to -1, then use the global setting for this line. (This is the
default setting.)
•
If set to 0, then disable SRTP.
•
If set to 1 then SRTP calls are preferred.
•
If set to 2, then SRTP calls only are generated/accepted.
Integer
0 (disabled)
-1
0
1
2
sip line1 mode: 1
Aastra Web UI
Advanced Settings>Global SIP>
Autodial Settings
Configuration Files aastra.cfg, <mac>.cfg
Globally specifies the SIP phone number that the IP phone autodials
when the handset is lifted from the phone cradle. An empty (blank)
value disables autodial on the phone.
Integer
Blank
Any valid SIP number
sip autodial number: 8500
A-81