Configuration File Options - Aastra SIP 53I Administrator's Manual

Administrator Options
Administrator Level Options
References
For information about options available to a User AND Administrator in the
Aastra Web UI, see your Model-specific User Guide.
For procedures to Restart your phone or restore factory defaults, see
Your Phone"
Configuration"
For more information about Advanced Settings for the IP Phone, see
"Configuring Network and Session Initiation Protocol (SIP) Features."
For procedures on configuring the Basic Settings for the IP Phone, see
"Configuring Operational Features."

Configuration File Options

An Administrator can enter specific parameters in the configuration files to
configure the IP phones. All parameters in configuration files can only be set by
an administrator.
References
For a procedure on using the configuration files, see
"Configuration Files (Administrator Only)"
For a description of each parameter you can enter in the configuration files, see
Appendix A, "Configuration Parameters."
41-001160-00, Release 2.1, Rev 04
on page 3-13, and "Set Phone to Factory Defaults/Erase Local
on page 3-15.
Chapter 2, the section,
on page 2-1.
"Restarting
Chapter 4,
Chapter 5,
3-9