Aastra SIP 53I Administrator's Manual page 555

Configuration Parameters
Operational, Basic, and Advanced Parameters
Parameter –
sip lineN bla number
BLA Number
(in Web UI)
Description
Format
Default Value
Range
Example
41-001160-00, Release 2.1, Rev 04
Aastra Web UI
Configuration Files
Allows you to assign a phone number that is shared on specific lines on
the IP phone.
For Sylantro Server:
When configuring the BLA feature on a Sylantro server, the value set for
the sip lineN bla number parameter shall be the same value set for the
sip lineN user name parameter for all the phones in the group. For
example, if sip lineN user name is 1010, you would configure BLA on a
per-line basis for the Sylantro server as follows:
sip line1 user name: 1010(# for all the phones)
sip line1 bla number: 1010
For ININ Server:
When configuring the BLA feature on an ININ server, the value set for the
sip lineN bla number parameter shall be the same value set for the sip
lineN user name parameter without the incremented digit added to the
phone #. For example, if the sip lineN user name for the first phone is
10101, and the sip lineN user name for the second phone is 10102, etc.
you would configure BLA on a per-line basis for the ININ server as
follows:
sip line1 user name: 10101(# for phone 1 with)
sip line1 bla number: 1010appearance of phone 3)
sip line1 user name: 10102(# for phone 2 with)
sip line1 bla number: 1010appearance of phone 3)
sip line1 user name: 1010(# for phone 3)
sip line1 bla number: 1010
Note: The original phone number which has the bridged line appearance
on other phones, will have the "sip lineN user name" parameter the same
as the "sip lineN bla number" (1010 in the above example on Phone 3).
Integer
Not Applicable
Not Applicable
Sylantro Server:
sip line1 bla number: 1010
ININ Server:
sip line 1 bla number: 1010
Advanced Settings->Line 1 thru 9
aastra.cfg, <mac>.cfg
A-53