Configuration Example - Aastra SIP 53I Administrator's Manual

IP Phone Administrator Guide
Operational Features

Configuration Example

The following example illustrates the use of the "softkeyN states" parameter, and
the "softkeyN type" parameter with a value of empty. For clarity purposes, only
the "softkeyN type" and "softkeyNstates" parameters are shown.
softkey1 type: line
softkey1 states: idle connected
softkey3 type: dnd
softkey3 states: idle
softkey4 type: line
softkey5 type: empty
softkey5 states: connected
softkey6 type: speeddial
softkey6 states: connected
The following table shows how the keys in the example above would display on
the IP Phone UI.
Softkey
softkey1 Key 1
softkey2 (not used)
softkey3 Key 2
softkey4 Key 3
softkey5 (not used)
softkey6 (not used)
Softkeys and programmable keys are configurable using the Aastra Web UI or the
configuration files.
5-96
Note: The "empty" key type allows a softkey to be removed quickly by
deleting the softkey information from the configuration file.
Idle Connected
Key 2
(not used)
(not used)
Key 3
Key 4 (blank)
Key 5
Notes
Line displays for softkey1.
Key 1 in connected state is the Drop key. Idle
and connected display as applicable.
Softkey2 is not displayed.
DND displays for softkey3. Idle displays as
applicable.
Line displays for softkey4. Default state
values (idle, connected, incoming, outgoing)
display as applicable.
A blank displays for softkey5. Connected
displays as applicable.
Speeddial displays for softkey6. Connected
displays as applicable.
41-001160-00, Release 2.1, Rev 04