Aastra SIP 53I Administrator's Manual page 395

Configuring Operational Features
Operational Features
Enabling/Disabling Directory List
You can enable and disable user access to the Directory List on the IP phones
using the following parameter in the configuration files:
• directory disabled
Valid values for this parameter are 0 (enabled) and 1 (disabled). If this parameter
is set to 0, the Directory List can be accessed by all users. If this parameter is set
to 1, the Directory List does not display on the IP phone and the Directory key is
disabled. On the 53i, the "Directory" option is also removed from the "Services"
menu.
Use the following procedures to enable/disable the Directory List on the IP
phones.
Configuration Files
For specific parameters you can set in the configuration files for enabling/disabling the Directory List, see
Appendix A, the section,
41-001160-00, Release 2.1, Rev 04
"Directory Settings" on page A-85.
5-185