Euphonix EuCon User Manual page 18

8. Press and release the POWER switch on your MC Mix.
9. Launch your application and open a project (Logic, Cubase, Digital Performer,
10. To set up your application to work with the MC Mix, refer to the EuCon Ap-
18
Controlling a Second Workstation
The MC Mix can control applications running on a second computer, referred to in
this guide as a workstation. Most users will not need to do this because EuControl
will be running on the same workstation as the their audio/video applications.
Insert the installation CD into your Macintosh or, if you downloaded the latest
software from the web, double-click on the installer. Follow the instructions to
install the software.
Copy the latest software that you downloaded at the beginning of this chapter
over to the second workstation. Double-click the Install EuCon Workstation installer
in the Extras folder and follow the instructions to install the EuCon software.
Look at the top-right of your screen and wait up to 60 seconds. A green icon
in the menu bar indicates correct installation.
If you did not see the green icon:
• See My Surfaces on page 42 and add the MC Mix manually.
• Shut down the MC Mix and the Mac and repeat steps 7 and 8.
• If your Mac is pre-2002 and you are using an Ethernet router or switch,
you need to purchase a normal straight-through Ethernet cable (instead
of the crossover Ethernet cable supplied) from a computer store.
• See www.euphonix.com/artist/support
shooting information
Pro Tools, etc.).
plication Setup Guide that you downloaded at the beginning of this section.
Logic users do not need this document because additional setup is not
required.
professional control surface
for the most current trouble-
.
Artist Series