Chapter 2: Setup And Installation; Setting Up The Mc Mix; Elevating The Mc Mix; Foldout Leg (Left); Riser Bracket (Right) - Euphonix EuCon User Manual

professional control surface

Chapter 2: Setup and Installation

Euphonix is dedicated to making your MC Mix experience enjoyable and trouble-
free so we will periodically update the following software and documentation:
• EuControl: This software runs your MC Mix and communicates to your audio/video
application. Always download the new version if prompted to do so when you launch
EuControl.
• MC Mix User Guide (PDF): This is the complete user guide for your MC Mix and the
document you are currently reading.
• EuCon Application Setup Guide (PDF): The MC Mix supports many applications, each
with a slightly different setup procedure. This document includes supplementary
instructions for each application.
Before proceeding, download the latest versions from:
www.euphonix.com/artist/support
2.1

Setting Up the MC Mix

Unpack your MC Mix, power adapter, AC power cord, installation CD, Ethernet
crossover cable, and riser brackets from its box.
2.1.1

Elevating the MC Mix

The MC Mix can be elevated or angled using small foldout legs on the bottom of
the unit or elevated and angled by attaching the larger riser brackets. Since either
method requires turning the MC Mix over, it is easier to do this before attaching
any cables. Turn it over and place it on a soft surface.
Pull out all four of the small foldout legs to moderately elevate the unit; pull out
only the back two to angle the unit towards you (Figure 2-1 left).
Foldout
leg
Riser
bracket
Figure 2-1 Foldout leg (left); riser bracket (right)
Artist Series
13