Sel; Assign; Rec; Auto - Euphonix EuCon User Manual

STOP
Press
PLAY
Press

REC

Press
are punched into record.
4.3.6

SEL

Pressing a fader's SEL key selects that track in the application and attentions
(see Channel Mode on page 34) it on the MC Mix.
NOTE: Some applications allow selecting multiple tracks if the Shift key on the work-
30
4.3.7

ASSIGN

Press the
(see Assign on page 48).
4.3.8 REC
Press the
that track is enabled (armed) for recording. Press the
enabled for recording.
NOTE: Some applications blink the
4.3.9

AUTO

To change an application track's automation mode, press the
desired automation mode appears in the channel display.
STOP to stop all other functions.
PLAY to play the project from the current location.
REC begin recording at the current location. All tracks armed for recording
station is held down while selecting tracks. In this case, the attentioned track
is the last one selected.
ASSIGN key to display the Assign tab in the EuControl Settings dialog
REC key to enable recording on a track. The
solid when recording.
professional control surface
REC key lights red to indicate
REC
REC LED when armed but not recording and light
Artist Series
key to cancel a track
AUTO key until the