Adjustments After Parts Replacement; Precautions In Replacing Engine Controller Board; Precautions In Replacing Eeprom; Eeprom Replacement After Crm Board Replacement - Oki C7200 Service Manual
Adjustments to be implemented after each part replacement is described below. Adjustment and correction of color registration are always required for each part
replacement.
Replaced Part
LED Head
Drum Cartridge
(Y, M, C, K)
Fuser Unit
Belt Cassette Assy
PU (K71 Bord)
CU (CRM Board)
Note:
When the EEPROM of the PU (K71 Board) is replaced to a new one, color balance must be adjusted.
4.2.1 Precautions in replacing engine controller board
4.2.2 Precautions in replacing EEPROM
4.2.3 EEPROM replacement after CRM board replacement
Service Guide - C7000 Series
Adjustment
Color balance adjustment.
Color balance adjustment.
Not required.
Not required.
Re-mounting the EEPROM used prior to the replacement *Note
Re-mounting the EEPROM used prior to the replacement *Note
Copyright 1999, Okidata, Division of OKI America, Inc. All rights reserved.