Oki C7200 Service Manual page 390

Color led page printer
Hide thumbs Also See for C7200:
Table of Contents

Advertisement

paper reverse in
the Duplex unit.
Check DUPLEX
Paper jam
371: Paper Jam
detected at the
Duplex unit
Check DUPLEX
Paper jam
372: Paper Jam
detected during
paper feed from
the Duplex unit
Open Side
Paper jam during
Cover 380:
paper feed fro the
Paper Jam
Cassette 1, 2, 3,
4 or 5.
Open Stacker
Paper jam
Cover 381:
detected between
Paper Jam
the B ID and
Fuser
Open Stacker
Paper jam
Cover 382:
detected in the
Paper Jam
Fuser unit or
between the
Fuser and paper
ejection.
Open Stacked
Paper jam
Cover 383:
detected on
Paper Jam
paper entering
the Duplex unit.
Check MP Tray
Paper jam during
390: Paper Jam
paper feed from
the MP tray
Check Tray *
Paper jam
391 ~ 395:
detected between
Paper Jam
a cassette and B
ID.
Open Stacker
Paper in a size
Cover 400:
different (45 mm
Paper Size Error
or more) from the
specification
detected at the
Printer engine.
Toner Low
Toner in one of
1) Is a paper jammed in the Duplex
unit?
1) Does misfeed occur in the Duplex
unit?
1) Does misfeed occur in the specified
cassette?
1) Is a paper jammed between the Y ID
and Fuser?
2) Is the load on the Fuser unit
normal?
1) Is a paper jammed in the Fuser unit
or between Y ID and Fuser unit?
2) Is the Paper eject switch working
normally?
1) Is paper jammed at the entrance of
the Duplex unit or in the unit?
1) Does misfeed occur around the MP
Tray?
1) Is a paper jammed around the
cassette or between B ID and cassette.
2) Does the Paper entry switch operate
normally?
1) Is the paper in a custom size?
2) Is the paper in the standard size?
1) Is the specified toner cartridge
Duplex unit, or replace
it.
Yes
Remove the paper jam.
No
Check the Duplex unit,
or replace it.
Yes
Remove the misfed
No
paper and close the
cover. Check the
Duplex unit, or replace
it.
Yes
Remove the jammed
No
paper and install the
cassette. Check the
cassette 1, 2, 3, 4, or 5
or replace it.
Yes
Remove the jammed
NO
paper. Replace the
Fuser unit.
Yes
Remove the jammed
No
paper. Replace the
Fuser unit.
Yes
Remove the jammed
No
paper and close. Check
the Duplex unit, or
replace it.
Yes
Remove the misfed
No
paper and close the
cover. Check the MP
Tray, or replace it.
Yes
Remove the jammed
No
paper. Replace the
Paper entry switch.
Yes
No action required.
Yes
Adjust the Paper size
No
guide of the cassette.
Replace the Paper size
board.
Yes
Replace it with a new

Advertisement

Table of Contents
loading

This manual is also suitable for:

C7000 series

Table of Contents