4.1.3.1 Short plug settings
The CRM board has five short plugs that can be set as follows:
Short Plug (WE1, 3, 5 and 7)
Sets flash ROM DIMM to connect WE signals.
(1-2 Short: Disconnects WE signals; 2-3 Short: Connects WE signals.)
Factory 2-3 Short Setting: Re-programmable flash ROM DIMM.
Short Plug (DIMM2)
Configures the banks of the ROM DIMM slot B.
(1-2 Short: For 1-Bank DIMM; 2-3 Short: For 2-Bank DIMM)
A 1-bank DIMM (dual-sided 1 bank) is only a prototype and, in production-run printers, does not exist.
Service Guide - C7000 Series
Copyright 1999, Okidata, Division of OKI America, Inc. All rights reserved.
Chapter 4 Adjustments
Page: 111