Crm Board Adjustments; Short Plug Settings - Oki C7200 Service Manual

4.1.3 CRM board adjustments

Destination Setting:
The CRM board, a main board, is a common ROM among destinations. When using the board for maintenance, its destination must be set using the system
maintenance mode. Placing Printer in System Maintenance Mode: (Not on view of users)
1. While holding the (2) and (6) keys down, turn the power on.
2. Continue to press the (3) and (7) keys to select a value to be set, and press SELECT to fix the value.
Set Values and Destinations
Set Value ODA
Destination ODA
Remark LETTER inch
Model Name Setting:
The CU program automatically determines and switches between following printer specifications (LED head width, LED head resolution, presence or absence of
Japanese fonts (Heisei fonts, Morisawa fonts)).
LED Head Width
A4
A3
EEPROM Initialization
To initialize the EEPROM, enter the maintenance mode and select the EEPROM RESET item after the general start-up.

4.1.3.1 Short plug settings

4.1.3.2 Printings singly using controller-equipped printer
Service Guide - C7000 Series
OEL APS
OEL APS
A4 millimeter A4
Resolution
600 dpi
1200 dpi
600 dpi
1200 dpi
Copyright 1999, Okidata, Division of OKI America, Inc. All rights reserved.
Chapter 4 Adjustments
JP1
Japan
A4 millimeter
With Kanji fonts
Two Heisei fonts
ML3010c
/
ML3020c
ML3050c
Page: 110
JPOEM OEMA
Japan OEM OEM
A4 millimeter
Five Morisawa fonts
/
/
/
OEML
OEM
Without Kanji fonts
ODA / OEL / ASP
OKI C7200
OKI C7400
OKI C9200
OKI C9400