Paper Jam Detection - Oki C7200 Service Manual

2.8 Paper Jam Detection

The C7000 Series of printers detect paper jams after power-on and during printing. When a paper jam occurs, the printing operation is immediately suspended.
After the cover is opened and the jammed paper is removed, closing the cover resumes the printing.
Classification / Belt ERROR
STSOP/7 Paper Size Error
SSTOP/5 Misfeed from Duplex
OPJAM/6 Transport Assembly
OPFEED/4
SSTOP/5 Misfeed from
OPJAM/6 Multi-Purpose Tray
OPFEED/3 (MT)
SSTOP/5 Duplex Paper
OPJAM/6 Reversing Jam
OPFEED/2,1,0
STSOP/5 Duplex Unit
OPJAM/5 Entrance Paper Jam
STSOP/5 Duplex Unit Paper
OPJAM/3 Input Jam
STSOP/5 Paper Ejection Jam
OPJAM/2
STSOP/5 Paper Transport Jam
OPJAM/1
STSOP/5 Loading Jam
OPJAM/0
STSOP/4 MT Paper Empty
OPAP/3
STSOP/4 Cassette 1, 2, or 3
OPAP/2,1,0 Paper Empty
Service Guide - C7000 Series
Chapter 2 Operation
Error Condition
The entrance cassette sensor has not turned off
within fixed time after its turn-on. Loading of multiple
sheets of paper has been detected.
Paper could not be loaded from the duplex transport
assembly.
Paper could not be loaded from the MT.
The duplex rear sensor has not turned on during the
paper reversing operation of the duplex unit.
The duplex-in sensor has not turned on during the
paper loading in the duplex unit.
The duplex front sensor has not turned on during
the operation.
The paper exit sensor has not detected the end of
paper within fixed time after the detection of the
beginning of it. The paper exit sensor has not turned
off since its turn-on.
The paper exit sensor has not turned on while paper
is running on the belt.
Paper has not reached the entrance belt sensor or
the MT sensor after the completion of the hopping.
There is no paper in the multi-purpose tray.
There is no paper in the cassette 1, 2, or 3.
Page: 32