Replace Wwn/Nickname Dialog Box - HP Surestore 64 - Director Switch User Manual

Figure 42

Replace WWN/Nickname Dialog Box

4. Enter the WWN or nickname that you want to replace.
5. Click OK.
The Replace WWN/Nickname dialog box displays. The WWN or nickname that you
selected to replace displays at the top of the dialog box. The Zones affected section
lists the zones in which the specified WWN or nickname is found.
6. Enter the replacement WWN or nickname.
7. Click OK.
The Replace WWN/Nicknames dialog box closes.
All of the specified WWNs or nicknames are replaced.
8. Click Close in the Zone Sets dialog box.
Enable and Disable Default Zone
A default zone consists of all devices that have not been configured as members of a zone
in a currently-active zone set. When no zone set is active, then all devices are considered to
90 Configuring and Managing Zoning