Fabric Manager With Zoning View - HP Surestore 64 - Director Switch User Manual

The Fabric Manager's default view is the Topology View. You can change between this view
and the Zoning View (Figure 7) by selecting options on the View menu.
Figure 7

Fabric Manager with Zoning View

The Fabric Manager's menu options differ from the HP EFC Manager's menu options. The
Fabric Manager menu options are described in Using the Fabric Manager Navigation
Control Panel on page 40.
The alert panel operates like the alert panel in the Product View, described in Alert Panel
on page 12, and shows the most critical status for any product in the fabric.
Fabric Manager Overview 17